Faretec

The CT-7 Leg Traction Splint is a carbon fiber leg traction device designed to provide femur traction in a field environment. The CT-7 is designed to eliminate cords, pulleys, redundant leg straps and does not extend beyond the patient's foot.

• All adjustments are done at the patient's ankle allowing clear view of patient limb length
• ACME Screw Traction Technology is precise, strong and accurate
• Treaded Rod Traction System allows for increases in traction in small increments
• Ability to apply 10 - 30 pounds of traction in approximately 30 seconds
• Does not extend beyond patient's foot
• Features a padded ischial strap and a one piece slip resistant ankle hitch
• Light weight (1.5 Lbs)

The Threaded Rod Traction system allows the Responder to apply traction slowly and in a controlled manner, preventing further injury to the soft tissue.

The CT-6 is a Leg Traction Splint designed for Pre Hospital Care and Patient transport, specifically in combat scenarios. It is primarily used on patients with mid-line femur fractures. The CT-6 helps relieve patient pain and prevents further damage to surrounding muscle and tissue while reducing the risk of death caused from severed arteries. The CT-6 is made of carbon tubing which snaps together via an internal bungee. A Cobra buckle secures the Ischial strap to the upper leg and groin. These buckles prevent accidental releases and are commonly used by US military forces. Traction is achieved with a 4 to1 purchase system using a small line to apply tension. This method results in a very precise and delicate form or traction that is also powerful enough to be effective on extra large adults. The CT-6 is extremely compact, light and strong.

• Light: Unit weighs 1.1 lbs (500 grams)
• Compact: Unit fits in small synch bag, 11 x 4 x 3in.
• Includes Molle compatible bag, labeled.
• Strong: Carbon Fiber poles and injection molded plastics.
• Effective: Four to one pulley system for efficient, easily adjustable traction.
• One unit fits both Adult and Pediatric patients.
• NSN 6515 01 521 5730

Responder Gauze treats moderate to severe wounds involving heavy blood loss. Made with high quality cotton for maximum absorption and stability. Responder Gauze is vacuum packed small for easy storage yet expands to cover large wound areas. This Gauze can be used to control hemmorrhage in conjunction with a compression bandage, used as a backing gauze for hemostatic dressings or for minor wound bandaging. Its low cube space requirement and rugged, durable vacuum sealed packaging make it easy to fit in both individual first aid kits and medic kits.

The FS-3 is an easily moldable fiberglass splint that can be activated with water and hardens in less than three minutes. Its strength and molding abilities make the FS-3 highly versatile; it has potential uses in multiple applications. The FastSet-3 can actually be form-fitted for displaced bones that can't be realigned, or for dislocated joints. The FS-3 provides it’s patient with the ideal orthopedic splinting experience. It combines the easy application of utility splints with the advantages of a fiberglass cast. The patient can be immobilized moments after the first responder arrives. The inside of the splint has a soft moisture wicking lining, for comfortable skin contact. During the 2 to 3 minutes it takes for the splint to set up, you can gently form the FS-3. This allows the responder to get the ideal combination of stability and patient comfort. The Fast Set-3 is x-ray-translucent, so it can be left in place until a final disposition on how best to manage the injury is reached.

The FastSet-3 is packaged in a sealed, easy to open bag. Each unit includes easy open tear holes, which allow for fast night applications. Kits are available so that activation and the ability to secure the splint is on hand. A complete Kit includes: 1 FS-3, 1 Responder Gauze, 1 30ml SalJet. Several sizes available.

Key Features:

• Water Activated Polyester
• X-Ray Translucent
• Sets In Just Under 3 Minutes
• No Gloves Necessary
• Safe For Direct Contact With Skin
• Secure, Suppport, Immobilize

Size: 3 x 12in. (7.6 x 30.5cm) Weight: .35lbs / 159grams

Packaging: Airtight/watertight, heavy duty wrapping. Quick open tear holes. Materials: Moisture wicking synthetic fabric, water activated fiberglass.

Notes: Available in flat or rolled style packaging; both with finger tear holes.

The FS-3 is an easily moldable fiberglass splint that can be activated with water and hardens in less than three minutes. Its strength and molding abilities make the FS-3 highly versatile; it has potential uses in multiple applications. The FastSet-3 can actually be form-fitted for displaced bones that can't be realigned, or for dislocated joints. The FS-3 provides it’s patient with the ideal orthopedic splinting experience. It combines the easy application of utility splints with the advantages of a fiberglass cast. The patient can be immobilized moments after the first responder arrives. The inside of the splint has a soft moisture wicking lining, for comfortable skin contact. During the 2 to 3 minutes it takes for the splint to set up, you can gently form the FS-3. This allows the responder to get the ideal combination of stability and patient comfort. The Fast Set-3 is x-ray-translucent, so it can be left in place until a final disposition on how best to manage the injury is reached.

The FastSet-3 is packaged in a sealed, easy to open bag. Each unit includes easy open tear holes, which allow for fast night applications. Kits are available so that activation and the ability to secure the splint is on hand. A complete Kit includes: 1 FS-3, 1 Responder Gauze, 1 30ml SalJet. Several sizes available.

Key Features:

• Water Activated Polyester
• X-Ray Translucent
• Sets In Just Under 3 Minutes
• No Gloves Necessary
• Safe For Direct Contact With Skin
• Secure, Suppport, Immobilize

Size: 5 x 30in. (12.7 x 76cm) Weight: .98lbs / 445grams

Packaging: Airtight/watertight, heavy duty wrapping. Quick open tear holes. Materials: Moisture wicking synthetic fabric, water activated fiberglass.

Notes: Available in flat or rolled style packaging; both with finger tear holes.

The FS-3 is an easily moldable fiberglass splint that can be activated with water and hardens in less than three minutes. Its strength and molding abilities make the FS-3 highly versatile; it has potential uses in multiple applications. The FastSet-3 can actually be form-fitted for displaced bones that can't be realigned, or for dislocated joints. The FS-3 provides it’s patient with the ideal orthopedic splinting experience. It combines the easy application of utility splints with the advantages of a fiberglass cast. The patient can be immobilized moments after the first responder arrives. The inside of the splint has a soft moisture wicking lining, for comfortable skin contact. During the 2 to 3 minutes it takes for the splint to set up, you can gently form the FS-3. This allows the responder to get the ideal combination of stability and patient comfort. The Fast Set-3 is x-ray-translucent, so it can be left in place until a final disposition on how best to manage the injury is reached.

The FastSet-3 is packaged in a sealed, easy to open bag. Each unit includes easy open tear holes, which allow for fast night applications. Kits are available so that activation and the ability to secure the splint is on hand. A complete Kit includes: 1 FS-3, 1 Responder Gauze, 1 30ml SalJet. Several sizes available.

Key Features:

• Water Activated Polyester
• X-Ray Translucent
• Sets In Just Under 3 Minutes
• No Gloves Necessary
• Safe For Direct Contact With Skin
• Secure, Suppport, Immobilize

Size: 4 x 30in. (10 x 76cm) Weight: .82lbs / 371grams

Packaging: Airtight/watertight, heavy duty wrapping. Quick open tear holes. Materials: Moisture wicking synthetic fabric, water activated fiberglass.

Notes: Available in flat or rolled style packaging; both with finger tear holes.

The FS-3 is an easily moldable fiberglass splint that can be activated with water and hardens in less than three minutes. Its strength and molding abilities make the FS-3 highly versatile; it has potential uses in multiple applications. The FastSet-3 can actually be form-fitted for displaced bones that can't be realigned, or for dislocated joints. The FS-3 provides it’s patient with the ideal orthopedic splinting experience. It combines the easy application of utility splints with the advantages of a fiberglass cast. The patient can be immobilized moments after the first responder arrives. The inside of the splint has a soft moisture wicking lining, for comfortable skin contact. During the 2 to 3 minutes it takes for the splint to set up, you can gently form the FS-3. This allows the responder to get the ideal combination of stability and patient comfort. The Fast Set-3 is x-ray-translucent, so it can be left in place until a final disposition on how best to manage the injury is reached.

The FastSet-3 is packaged in a sealed, easy to open bag. Each unit includes easy open tear holes, which allow for fast night applications. Kits are available so that activation and the ability to secure the splint is on hand. A complete Kit includes: 1 FS-3, 1 Responder Gauze, 1 30ml SalJet. Several sizes available.

Key Features:

• Water Activated Polyester
• X-Ray Translucent
• Sets In Just Under 3 Minutes
• No Gloves Necessary
• Safe For Direct Contact With Skin
• Secure, Suppport, Immobilize

Size: 4 x 15in. (10 x 38cm) Weight: .43lbs / 195grams

Packaging: Airtight/watertight, heavy duty wrapping. Quick open tear holes. Materials: Moisture wicking synthetic fabric, water activated fiberglass.

Notes: Available in flat or rolled style packaging; both with finger tear holes.